HOME PRODUCTS SUPPORT INVESTORS LIVE DEMO CONTACT
VisualGate Systems Inc.
VisualGate Systems Inc.

› Powerline Products
› VueEDGE
› VueCAM
› VueNVR
› VueSOFT
› VueBRIDGE
› Powerline Kits
- DVR Systems
› Product Accessories
› White Papers
› Case Studies
› Testimonials


VueEDGE: VE2T
Digital Video Encoder
Using Powerline or Ethernet Technology

VueEDGE

The VueEDGE video encoder has been designed as the ultimate solution for locations that would like to leverage the best of IP technology with their existing analog cameras. This full-featured, "plug in and play" digital server, can be installed utilizing Powerline technology or by connecting to the Ethernet where cabling has already been installed. Alternately, a hybrid solution can be configured using both technologies when video surveillance systems require alternate solutions. This flexibility offers a cost effective and easy-to-install product for both business and home owners.

VueEDGE offers high quality video streaming with an onboard, user configurable video buffer for pre and post alarm event storage, and choice of M-JPEG or MPEG compression. Utilizing IP technology, locations can establish remote monitoring capabilities and access future software upgrades via the Internet. The server can alos support 1 or 2 camera inputs simultaneously.

Product Features
  

• Encodes and compresses any analog camera video for streaming over the network
• Easy to install, "plug in and play" set up
• No new wires when using Powerline technology
• Direct Ethernet LAN connection for use where cabling is already installed
• Enables hybrid solution where some VS-602s are used in Powerline mode and others in Ethernet mode
• Transmits audio, alarm events and control data over TCP/IP
• DVD-quality 4CIF or D1 video streaming at 30 FPS
• Superior security with 56-bit encryption and password-based access
• Selectable M-JPEG or MPEG-4 compression

Technical Specifications
  

System Requirements Requires VueNVR
Video and Compression • MPEG-4 - selectable image frame rate up to 30 fps at D1 - Max resolution 4 CIF/D1
• M-JPEG - selectable up to 7 fps VGA (640x480)
General I/O • 2 x BNC connectors
• 1 x RJ-45 10/100 Base-T auto sensing Ethernet port
• 1 x RJ-45 port (PTZ control, selectable baud rates 2400, 4800, 9600)
• Inputs: 2 x opto-isolated sensors (3-12VDC/50mA) dry contacts
• Output: 1 x relay (trigger) max 24VDC/1A, time settings selectable 1-30 seconds
• Dipswitch: selection for Powerline or Ethernet function
• Pushbutton: reset for default configuration
• Audio - line out and mic input (mini-phone 3.5mm)
• AC input - male 2 pin socket
Video Input NTSC/PAL
Supported Protocols TCP/IP, PING, ICMP, DHCP
Security 56-bit encryption
Software • Operating System: RTOS
• System firmware upgradeable remotely via HTTPS/TCP
Hardware and Video Server Engine • 64-bit DSP
• M-JPEG and MPEG 4 embedded firmware engine
• Hardware watchdog
• Memory:
  o 32MB SDRAM
  o 4MB flash memory
• 4 LEDs:
  o Powerline/Ethernet link
  o Powerline/Ethernet activity
  o Powerline/Ethernet mode
  o DSP run
Certifications and Regulatory • FCC class A
• cTUVus
Mechanical and Environment • AC embedded power supply, consumption 5W
• Operating temp: 5 - 40 °C (40 - 122 °F)
• Humidity: RH 10 - 90%
• Dimensions - approx 5.75" (L) x 4.5" (W) x 1.75" (H)
• Weight: 1.6 lbs or 0.8 kg
Enclosure Steel with corrosion protection and powder coating
AC Input 100 - 240 VAC, 0.5 A, 47 - 63 Hz

 

VueEDGE Downloads
Plug-in Required:
Get Acrobat
pdf Brochure: Introduction to PL-VUE
pdf Product Brochure
pdf Product Brochure - French
pdf Product Brochure - Spanish
pdf Product Warranty

Back to Top

Images shown for illustrative purposes only. Products may not be exactly as shown.
HOME - Products - Support - Investors - Live Demo - Contact

Copyright 2005, VisualGate Systems Inc.